Admin Address
The default IP address to access the settings of the Rogers Ignite Gateway (XB6) modem is typically:

http://10.0.0.1

You can enter this IP address into the address bar of a web browser on a device connected to your network. This should take you to the login page for your modem's settings. The default username and password are usually "admin" and "password", respectively, but you should check your modem's documentation or the label on the modem itself to be sure.

Remember to change the default login credentials to enhance the security of your network.

Behind the modem

Power Button
Phone Ports
4 Ethernet Ports
Coax
Power Port

Rogers Ignite Modem Light Pattern

The Rogers Ignite Gateway, also known as the XB6 or Technicolor CGM4140COM or Arris TG3482, is a WiFi modem and router. Here's what each light means:

1. **Power**:
- Solid White: Power is properly connected.
- Off: No power.

2. **2.4 GHz**:
- Solid White: 2.4 GHz WiFi is enabled.
- Off: 2.4 GHz WiFi is disabled.

3. **5 GHz**:
- Solid White: 5 GHz WiFi is enabled.
- Off: 5 GHz WiFi is disabled.

4. **VoIP**:
- Solid White: Telephone line is enabled and fully operational.
- Blinking White: Telephone line is enabled and on a call.
- Off: Telephone line is disabled.

5. **Battery**:
- Solid White: Battery is installed and fully charged.
- Blinking White: Battery is charging.
- Off: No battery is installed.

6. **Ethernet (1 - 2)**:
- Solid White: A device is connected to the Ethernet port.
- Blinking White: Data is being transferred between the modem and your device.
- Off: No device is connected to the Ethernet port.

Please note that if any of the lights are blinking for an extended period or if they are a color not listed here, it could indicate a problem with your modem or your internet connection. In such cases, you should contact Rogers' customer support for assistance.

Rogers Ignite Modem Line Stats

The Rogers Ignite Gateway, also known as the XB6 or Technicolor CGM4140COM or Arris TG3482, is a DOCSIS 3.1 cable modem. For this modem to function optimally, the line statistics or signal levels should ideally be within the following ranges:

1. **Downstream (Receive) Signal Levels**: This represents the signal level received by the modem from the cable provider. The optimal range is -7 dBmV to +7 dBmV. Anything outside this range might cause issues.

2. **Upstream (Transmit) Signal Levels**: This represents the signal level transmitted by the modem to reach the cable provider. The optimal range is between 35 dBmV and 50 dBmV. If the signal level is too low or too high, it could indicate a problem.

3. **Signal to Noise Ratio (SNR)**: This measures the clarity of the cable channel signal. For a DOCSIS 3.1 modem, the minimum downstream SNR should be 30 dB, but ideally, it should be above 33 dB for the best performance.

4. **Corrected and Uncorrected Codewords**: Codewords are units of data the modem uses. Corrected codewords indicate that there was an error with the data, but it was corrected. Uncorrected codewords indicate that there was an error that could not be corrected. Ideally, the number of uncorrected codewords should be zero, or very low.

Please note that these are general guidelines and the acceptable levels can vary slightly depending on your specific cable provider and the conditions of your cable network. If you're experiencing issues and your signal levels are outside these ranges, you should contact your internet service provider for assistance.

How-DO-I ??

Chams's is working at updating it's How-To's page! Need help on how to ping in windows, see system information, start&stop dhcp.

HOW-DO-I ?

CHASMS.COM IS 25 years old

Although under new management, CHASMS.COM has been around for 25 years! This is an incredible success! Over 2 decades of helping millions of people around the world!

Thanks to ChasM's, millions of people managed to solve various IT issues, and you can do the same right now. All you need to do is to try out this incredible tool and results can indeed pay off. Give it a try and see how easy it can be to identify and solve any problems. You will always be able to resolve IT issues as long as you have the tool to emulate internet applications, hardware functions, and other features. ChasM's is here to bring you all of that and so much more, all while being able to deliver professional screenshots for all these issues. Check out this extraordinary tool, and you will not be disappointed!"

ChasM's is a tool that has been available for the past 20 years and which helped millions of IT professionals. Its advantages come from the amazing ease of use, stellar attention to detail and incredible value. Since ChasM's can simulate and help troubleshoot spam, security tools, routers, modems, networking, games, Mac OS, Windows, email, and browsers, you can count on it to help you figure out any problems fast and easy.

Rogers Ignite Modem

Behind the modem

Most Popular

iOS 13.1 for iphone

MAC Os Catalina

Windows 10

Windows 10 version 19.03

MAc os Monterey

Windows 11

How-DO-I ??

CHASMS.COM IS 25 years old